STEP BY STEP GUIDE HOW TO ASSEMBLE AND ALIGN YOUR DISH
Open the brown box and lay out all the parts on the floor.
Attach folding bracket and Install bolts and screws
Insert screw through side into correct hole for your elevation, feed the screw a quarter way through and fit metal sheet onto screw, attach bolt to end.
Slide ubolt through the side of the bracket and back around.
Attach both metal brackets to the ubolts and attach bolts
Pickup your dish and slide the bracket over the main tripod pole, then tigten the four bolts to the pole.
Fold arm out and turn locknut till it is tight, you should not be able to fold the arm in.
Clamp the two plastic brackets around the lnb and insert the two screws into the holes till tight.
Section 2 : Alignment and Tuning
